Categories

Site Information

 Loading... Please wait...
  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
  • Image 6
  • Image 7

VXDIAG VCX NANO USB Vehicle Communication Interface for Ford and Mazda

$149.99
SKU:
VXDIAG-FORD
Quantity:

Product Description

The VXDIAG VCX NANO is an OEM diagnostic interface for Ford and Mazda vehicles. It is compatible with the Ford IDS and Mazda IDS OEM software and also 3rd party software. VCX Nano meets SAE J2534 (Pass–thru) standards and is compatible with older and new Ford and Mazda vehicles till year 2015.

  • Compatible with Ford IDS Version V98 and Mazda IDS Version V99
  • Affordable alternative instead the Ford VCM II
  • Multi-Language Support:
    • English
    • German
    • French
    • Italian
    • Spanish
    • Dutch
    • Slovenian
    • Finnish
    • Danish
    • Norwegian
    • Portuguese(European)
    • Portuguese(Brazil)
    • Note: For Mazda only English is supported
  • Unlocked firmware
  • Supports both older and newer vehicles up to year 2015

VXDIAG VCX Nano Functions:

  • Programming & Installation of new ECUs (PCM, ABS, Instrument Cluster, Air Bag, Fuel Pumps, etc.)
  • Live Data-stream with Recording & Playback Functions for Main ECUs
  • Read & Clear Diagnostic Trouble Codes (DTCs)
  • Set, Adjust or Remove Speed Governors
  • Automatic vehicle recognition
  • New Software Re-flash for Existing ECUs
  • All Other Dealer Functions
  • Steering Angle Resets
  • Guided Fault Finding
  • Program New Keys
  • DPF Regeneration
  • Brake Bleeding
  • Injector Coding

Functions Tested Successfully:

  • Record and play back live data for ABS, PCM…tested ok
  • Program and Install new ECUs (PCM, ABS)…tested ok
  • Read and Clear DTCs…tested ok
  • Program New Keys for Mazda 6…tested ok
  • Set, adjust or remove speed governors…tested ok
  • DPF Regeneration…tested ok
  • Automatic vehicle recognition…tested ok
  • All other dealer functions…tested ok
  • Reset steering angle…tested ok
  • Find guided fault…tested ok
  • Injector Coding…tested ok

VXDIAG VCX NANO Computer Requirements:

  • At least 2GB Memroy for 32 bit and 4GB Memory for 64 bit
  • At least an Intel i3 processor or faster is recommended
  • USB 2.0 port or faster
  • Newer computers are recommended for the best performance 

Supports the following protocols:

  • ISO9141(K-Line)
  • ISO14230-2(K-Line)
  • ISO15765(CAN)
  • SAE-J1850 PWM(Ford SCP)
  • SAE-J1850 VPW(GM Class2)
  • Single Wire CAN(GMLAN)
  • Support 4 CAN, 3 High Speed CAN and Single Wire CAN.
  • Programming voltage: 5V~20V FEPs output.
  • Support multi-channels work continuously, for example: 2 wire CAN or K-Line work at same time.
  • Large memory to increase date throughput, 32KByte can be reached by single transfer

Hardware Specifications:

  • Processor: 32 bit High Speed ARM
  • Flash: 512KB
  • RAM: 64KB
  • Diagnostic Socket: J1962 OBDII
  • USB 2.0/1.1 compatible
  • Power: Vehicle powered DC 9V-36V or USB DC 5V
  • Consumption: Below 1W
  • Size: 80 x 40 x 28 mm

What's Included:

  • VXDIAG VCX NANO Interface
  • USB Cable
  • Carry Case
  • CD

Find Similar Products by Tag

Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!

Click the button below to add the VXDIAG VCX NANO USB Vehicle Communication Interface for Ford and Mazda to your wish list.