BMW INPA EDIABAS NCS K + D-CAN FTDI Interface + Jumper Switch + 20 Pin Adapter Cable

$49.99
(No reviews yet) Write a Review
SKU:
DCAN-BMW-SW-20P
UPC:
652129515684

Why Should You Buy It From Us?

  • Highest Quality K + D-CAN USB interface cable with FTDI FT232RQ chipset
  • Highest Quality Green Circuit Board
  • Built-In switch to switch between K-Line and D-CAN for older and newer models
  • Includes a simple BMW Tools software installation package with FTDI drivers 
  • Complete with the latest versions of INPA, EDIABAS, NCS Expert, NCS Dummy, Tool32, WinKFP and BMW Coding Tool
  • Supports BMW E-series from 1991-2016 (Includes 20 pin adapter cable for 1991-2001 models)
  • Includes a copy of our detailed installation guide
  • Compatible with Windows XP, 7 (32/64bit), 8, 8.1 (32/64bit), 10 (32/64bit)
  • Tech support if you have any questions or run into any problems during the installation 

The BMW K-Line + D-CAN OBD2 USB Cable is a must-have tool for any BMW E-series enthusiast. Paired with the included BMW Tools software package, it allows full diagnostics and coding for a wide range of BMW models from 2001-2016. See the list of supported models below. The simple installation package takes care of most of the configuration required to start and makes it easy for beginners to start coding and diagnostics.

Features

  • Integrated Switch to Easily Switch Between Older and Newer Models
  • Read and Erase Error Codes
  • Adaptations
  • Coding
  • Double K-Line Support
  • High Speed D-CAN and PT-CAN Support
  • Low Speed PT-CAN support
  • Battery Voltage detection by control line
  • Ignition Voltage detection by control line
  • Flash Data uploading and downloading (requires importing additional Daten files)
  • Input/Output control
  • CAN BUS mode emulation
  • FTDI FT232RQ Chipset
  • Supports a wide range of BMW models from year 1991-2016
  • Simple Installation Package with Included Drivers
  • Compatible with Windows XP (32/64bit), 7 (32/64bit), 8, 8.1 (32/64bit), 10 (32/64bit)
  • Includes a 20 Pin Adapter Cable for 1991 - 2001 vehicles

BMW Models Supported:

  • E36 3 Series
  • E38 7 Series
  • E39 5 Series
  • E46 3 Series
  • E52 Z8 
  • E53 X5
  • E60 E61 E63 E64 E65 E66 E67 E68
  • E70 E71 E72 X5
  • E81 E82 1 Series
  • E83 X3
  • E84 X1
  • E85 E86 Z4
  • E87 E88 1 Series
  • E89 Z4
  • E90 3 Series
  • E91 3 Series
  • E92 3 Series
  • E93 3 Series

Information About the Switch Positions:

  • K-LINE (Far Left Position): Year 1991 - 2007
  • D-CAN (Far Right Position): 3/2007 - 2016 

Software Included in BMW Tools Package:

  • INPA 5.06 (Script files in English)
  • EDIABAS 7.3.0
  • NCS Expert 4.0.1 (Menus and Buttons in English)
  • NCS Dummy 0.6.04
  • Tool32 4.03
  • WinKFP 5.3.1
  • BMW Coding Tool v2.5.0 (alternative to NCS Dummy or  for updating DATEN files)
  • Integrated SP-DATEN v53.3

Supports protocols

  • Fast magistral D-CAN and PT-CAN (500 kbit/s)
  • Slow magistral K-CAN (100 kbit/s)
  • Standard for BMW protocol (for BMW OBD interface)

System Requirements

  • OS: Microsoft Windows XP, Vista, 7, 8, 8.1, 10 (32 or 64bit)
  • CD/DVD ROM Drive
  • 1 Available USB Port (We recommend using the same USB port each time)
  • Minimum 1.2GHz Processor
  • Minimum 2GB of RAM
  • Intermediate experience with navigating Windows and installing software/drivers

What's Included

  • BMW K + D-CAN USB Interface Cable with Switch
  • 20 Pin OBDI to 16 Pin OBDII Adapter Cable
  • BMW Tools Software and Driver DVD
  • Our Installation Guide

 Visit our Knowledge Base for a detailed version of our INPA K-CAN D-CAN Installation Guide

inpa-v502-connection-screenshot-wm.jpg

 inpa-screen.jpg

ediabas.jpg

ncs-dum.jpg

winkfp.jpg