CARPROG V9.31 ECU Chip Tuning Programmer with Full Adapters

$79.99
(No reviews yet) Write a Review
SKU:
CARPROG-V9.31

CARPROG FULL V9.31 (with all Software's activated and all 21 items Adapters), was designed with regard to demands of our customers to have universal tool for car radios, dashboards, immobilizer repair including advanced functions like EEPROM and micro controller programmer.

Function:

1. Make the Universal tool - CARPROG inside have powerful 16-bit MPU and full set of automotive interface drivers. In basic version you will get hardware with extra functions: 12 input/output pins forEEPROM in-circuit programmer, future possibility's to make on the same hardware Micro controller programmer, K-line diagnostic,CAN line diagnostic,+5V/+12V output, USB, power supply only from USB.

2. Make the Low Cost tool - with CARPROG basic you will receive many extra functions (like car radio code calculator CC1, EEPROM programmer and VW dashboard's programmer by CAN) and all additional software's you can buy extra according your need 

3. Make it User Friendly - Windows XP software, works without any installations, on all PC, use USB to PC link, all adapters schematics diagrams online.

4.The best function of it is airbag reset,and it can not do by antenna.

Software:

ECU-OPEL - for OPEL login reader from motor hybrid ECU. Works for Bosch ME1.5.5, S-i-e-m-e-n-s SIMTEC71, SIMTEC71.1, Delco Diesel, Delco Multec.

OPEL CAN - for Opel ECU by CAN programmer - read/change mileage in EDC16, MT35E, HSFI 2.2 read PIN, reset ECU

PSG16 -for Opel PSG16 diesel pump by OBDII - read/change mileage, read PIN, reset ECU

OPEC28 -for Opel S-i-e-m-e-n-s Simtec ECU Tool Advanced

Airbag:

S5.1 - for VAG (for Audi,for VW,for Skoda,for Seat) Airbag Reset Tool

S5.2 - for BMW Airbag Reset Tool

S5.3 - for Mercedes B-enz Airbag Reset Tool

S5.4 - for Ford Airbag Reset Tool

S5.5 - for GM Airbag Reset Tool by OBDII

S5.6 - CARPROG CR16 Airbag tool for Audi,for Meredes,for Ford,for Volvo

S5.7 -for Renault Airbag reset tool

S5.8 -for Peugeot Airbag Reset tool

S5.9 - for Citroen Airbag Reset tool

S5.10 - for Honda Airbag Reset tool

S5.11 -for Audi Airbag reset tool by direct connection to EEPROM or MPU

S5.14 - for Ford Airbag Reset tool by direct connection to EEPROM or MPU

S5.16 - for Hyundai Airbag Reset tool

S5.17 - for KIA Airbag Reset tool

S5.18 - for Lexus Airbag Reset tool

S5.19 - for Rover Airbag Reset tool

S5.21 - for Mazda Airbag Reset tool

S5.22 - for Mitsubishi airbag reset tool

S5.23 - for Nissan Airbag reset tool

S5.20 - for Mercedes B-enz Airbag Reset tool by direct connection

S5.25 - for Opel Airbag reset tool by direct connection

S5.27 - for Saab Airbag reset tool by direct connection

S5.28 - for Subaru Airbag reset tool by direct connection

S5.30 -for Toyota Airbag reset tool by direct connection

S5.31 - for Alfa Romeo Airbag Reset Tool

S5.32 -for Fiat Airbag Reset Tool

S5.33 -for Porsche Airbag Reset Tool

S5.34 - for Suzuki Airbag Reset Tool

S5.35 -for Volvo Airbag Reset Tool

S5.36 -for Daewoo Airbag Reset Tool

 
3. Dash:

S7.1 - for VAG CAN programmer

S7.2 - CarProg Dashboard programming

S7.3 - CarProg Dashboard programming package update

S7.4 -For Fiat KM correction by OBDII

S7.5 - for Mercedes B-enz ASSYST explorer

S7.6 - VDO dash decrypt tool -for Skoda Roomster, SuperB,for VW Polo,for Audi A3, A6, Allroad with 93C86 odometer change and PIN reading

S7.7 -for Ford odometer change by OBDII (by CAN)

S7.8 -for VW 2007+ by OBD -for Golf,for Passat, Eos, Touran, Tiguan, Octavia with Micronas by diagnostic

S7.10 – for VAG VDO dashboards by K-line OBDII diagnostic -for VW T5,for Passat B5,for Skoda SuperB and others

2J74Y for AUDI  2J74Y repair software for CarProg

 

4. Immobilizer:

S4.7 - Kessy tool - A8, Touareg, Phaeton, Cayenne PIN code reader

 

5. CarProg Processor:

S2.1 - CARPROG for Motorola (Freescale) HC05 MPU programmer

S2.2 - CARPROG for Motorola (Freescale) HC11 MPU programmer

S2.3 - CARPROG for Motorola (Freescale) HC08 MPU programmer

S2.4 - CARPROG  for Motorola (Freescale) 912 and 9S12 MPU

 

6. CarProg Programmer:

ST92 - ST92F120, ST92F150, ST92F250 internal EEPROM programmer

 

7. CarProg Radio Code:

S6.1 - CARPROG CC1

S6.2 - CARPROG CC2

S6.3 - CARPROG CCN

S6.4 - P-h-i-l-i-p-s Car Radio decoder

S6.5 - for Renault Car Radio decoder by serial number

S6.6 -for Audi for VW for Seat for Skoda car radio decoding software

RNS510 - Navigation decoding tool by Navi diagnostic

ADAPTERS:

1: CarProg Main hardware interface

2: A1 - OBD2 Adapter Cable (Inside have K-line and CAN bus switches. Use with all cars complained with OBDII standard)

3: D1 - Odometer-airbag Adapter  (Dashboard ,Airbag programming adapter )

4: A3 - Transponder Antenna ( Used with all CARPROG immobilizer software )

5: A10 - for Motorola Adapter Cable  (for Motorola MCU programing adapter )

6: A11 -for BMW EWS Adapter Cable   ( Used for BMW Immo software )

7: A16 - Car radio Cable   ( Used for Opel, for Renault, for Peugeot, for Citroen car radio made by P-h-i-l-i-p-s decoding)

8: A15 - Cable  (Used with D1 adapter ,Universal car dashboard and airbag programming adapter )

9: A17 - for Honda Airbag OBD2 Cable  (Adapter for Honda airbag reset by OBDII )

10: A4 - Eeprom Adapter Cable   (Used for eeprom programming)

11: A5 - DIP8 Clip Cable   (DIP8 Clip for eeprom programming)

12: A6 - SOIC8 Clip Cable   (SOIC8 Clip for eeprom programming)

13: A7 - MB 38-Pin Cable   (Used with MB Airbag and dashboard software)

14: A8 - for BMW 20-Pin Cable (Used for BMW airbag and dashboard software )

15: RNS510 Adapter Cable  (RNS510 radio decoding interface cable )

16: for VOLVO for FORD CAN 2006+ Cable   (Needed for airbag and dashboard programming)

17:for FIAT CAN 2006 Cable   (Needed for airbag and dashboard programming)

18: C1 OBD2 Female Cable

19: USB Cable

20: Power cable

21: CD   (Software V9.31 , user manual- help pdf files)