Skip to main content

ELM327 WiFi OBD2 Scanner with Modified HS CAN MS CAN Switch + PIC18F25K80 for FORScan

(No reviews yet) Write a Review

The ELM327 WiFi with a modified HS MS CAN Switch is an OBDII scanner designed for the FORScan or FOCCCUS software for Ford and Mazda vehicles. With the modified switch, you can access the Ford proprietary networks like HS CAN and MS CAN.


  • Modified ELM327 WiFi OBD2 Scanner with an HS and MS CAN Switch
  • Fully compatible with FORScan software and Android App for Ford, Mazda, Lincoln and Mercury vehicles
  • A must have for Ford owners
  • This interface allows you to diagnose Ford Group vehicles
  • Allows you to access Ford proprietary networks such as HS and MS CAN
  • Compatible with Windows XP 7 8 8.1 10 (32/64 bit)
  • Compatible with Apple iOS
  • Compatible with Android V4.0+
  • Micro-controller: Genuine Microchip PIC18F25K80
  • WiFi Module: Nufront NL6621W 
  • WiFi IP Address
  • WiFi Port: 35000

Supported Protocols:

- ISO15765-4 (CAN)
- ISO14230-4
- ISO9141-2
- J1850 VPW (GM vehicles)
- J1850 PWM (Ford vehicles)



  • Read diagnostic trouble codes, both generic and manufacturer-specific, and display their meaning
  • Clear trouble codes and turn off the MIL ("Check Engine" light)
  • Display current sensor data, including
  • Engine RPM
  • Calculated Load Value
  • Coolant Temperature
  • Fuel System Status
  • Vehicle Speed
  • Short Term Fuel Trim
  • Long Term Fuel Trim
  • Intake Manifold Pressure
  • Timing Advance
  • Intake Air Temperature
  • Air Flow Rate
  • Absolute Throttle Position
  • Oxygen sensor voltages/associated short term fuel trims
  • Fuel System status
  • Fuel Pressure
  • And More

All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them. 

Ford is a registered trademark of the Ford Motor Company.