Konnwei KW902 WiFi OBD2 Diagnostic Scanner [Leaf Compatible]

(No reviews yet) Write a Review

Attention Nissan Leaf Owners:

  • We are aware of reports of defective KW902 scanners on the market that have been purchased from online marketplaces. These defective scanners use a 20 ohm resistor and a different circuit board and NOT the correct 120 ohm resistor and can cause the CAN BUS to short out. The CAN BUS is used in the leaf not only for reading data, but to control the car. Shorting it out can cause strange behavior, damage and other errors. 
  • Our Konnwei products are original and supplied directly from Konnwei.
  • Resistance tested across the CAN BUS pins are 120 ohms


  • Uses a fast and reliable ARM chip
  • Compatible with Apple iOS, Android devices and Wi-Fi enabled Computers
  • Auto Sleep Mode: Sleeps after 30 mins when theres no connection
  • Stable and Fast Wi-Fi connection
  • Supports all OBDII Protocols
  • Compatible with the Nissan Leaf electric vehicle and Leaf Spy Android App
  • Read, erase and display engine trouble codes
  • Display real-time engine data
  • Original Konnwei Product
  • Resistance across the CAN BUS is 120 ohms

Supports all OBD-II protocols:

  • Automatic 
  • SAE J1850 PWM(41.6Kbaud) 
  • SAE J1850 VPW(10.4Kbaud) 
  • ISO9141-2(5 baud init,10.4Kbaud) 
  • ISO14230-4 KWP(5 baud init,10.4 Kbaud) 
  • ISO14230-4 KWP(fast init,10.4 Kbaud)
  • ISO15765-4 CAN(11bit ID,500 Kbaud) 
  • ISO15765-4 CAN(29bit ID,500 Kbaud)
  • ISO15765-4 CAN(11bit ID,250 Kbaud) 
  • ISO15765-4 CAN(29bit ID,250 Kbaud) 
  • SAE J1939 CAN(29bit ID,250*Kbaud) 
  • USER1 CAN(11*bit ID,125*Kbaud) 
  • USER2 CAN(11*bit ID,50*kbaud)


  • Supply voltage(VDD):12V
  • Work temperature range: -20 ~ +70?
  • Storage temperature range:-40 ~ +125?
  • Port: 35000
  • Antenna: Internal
  • Frequency Range: 2402 ~ 2480MHZ
  • Transmission Range: 50FT (Line of Sight)
  • Wi-Fi Standard: 802.11a/b/g
  • Plastic: Automotive Grade