Nissan DataScan II Software AND supported OBD2 USB Adapter Cable Package.
The Nissan DataScan II is intended for newer Nissan cars equipped with gray 16 pin OBDII connecter and use Consult II protocol over K line (DDL2) up to year 2007. The connector is usually located near the fuse box.
A list of cars that the software has been tested on is located on the Supported Vehicles page. The list is by no means comprehensive and is constantly being updated as new vehicles are tested.
NOTE: NOT COMPATIBLE with 2008+ cars that use the CAN BUS protocol. Some vehicles up to year 2004 use OBDII (K-Line) for communicating with the ECU, BUT still use the Consult I (14pin) port for diagnostics.
Functions:
- ECU Part Number
- Data Display ECM
- Data Display Settings
- Data Logging
- Self Diagnostics
- Idle Adjustment
- Timing Adjustment
- Active Test ECM
- Program Immobilizer Key
- Cylinder Power Test
- Log Analyzer
- Speed Test
- Data Replay
- Address Watch
- Wideband O2 sensor
- BCM Functions
- TCM Functions
- ABS Functions
- SRS Functions
For the full list of functions, please see the Nissan DataScan II product page
Specifications
- Compatible OS: Windows XP 7 8 8.1 10 (32/64bit)
- USB Serial Chip: FTDI FT232RL
- Diagnostic Interface: 16 pin OBDII J1962
- USB Interface: 2.0
- Voltage: 12V (no external power supply required)
- Weight: 150g
- Length: 1.8m
What's Included
- KKL OBD2 USB FTDI FT232RL Chipset Cable
- Nissan DataScan Diagnostics Software and Registered License
Supported Vehicles: OBDII cars using K-Line up to year 2007. See the supported vehicles list
Software Download:
Changes and additions in Nissan DataScan II Version 2.53:
- Diesel specific error codes
- Immobilizer key programming for diesel engines
- Steering wheel angel sensor reset
- Log analyser minor bug fixes
- Last used data log parameters and registers saved
Download Nissan DataScan II v2.53: NDS II 2_53.zip
Download USB FTDI drivers: FTDI.zip
Download Microsoft .Net Framework Version 3.5 SP1: dotnetfx35setup.zip - requires connection to internet to complete installation.
Download NDSII User Manual: NDSII User Manual Rev 1.pdf
Important Information:
- Registered users are provided with two software licenses: laptop and desktop PC
- Please test the unregistered version of the software before purchasing. If you are able to connect to the specific ECU (ECM, BCM, TCM, ABS, SRS, Diesel ECM) the other functions will work as well if supported by the ECU
- After purchasing, you will be e-mailed the software activation information via the online registration system within 1 business day
- Registered users are provided with two software licenses: laptop and desktop PC
- There are no refunds for software/license orders due to the nature of the product
