Skip to main content

OPCOM V1.7 OBD2 Diagnostic Interface for Opel Vauxhall Vivaro Van

Was: $24.99
Now: $19.99
(No reviews yet) Write a Review

The OP-COM V1.7 Diagnostic USB Interface is a Windows PC based diagnostic tool that is compatible with year 2001-2014 Opel/Vauxhall Vivaro, Nissan Primastar, Nissan NV300 and Renault Trafic light commercial vans. It allows you to read/clear engine codes, read live data, output tests and also allows you to communicate with many of the control modules such as the Engine, Transmission, Airbag, Instrument Cluster, BCM and more.


  • Supports Opel/Vauxhall Vivaro, Nissan Primastar, Nissan NV300 and Renault Trafic light commercial vans from 2001-2014
  • Software allows you to read and erase fault codes, view live data and perform output tests
  • Supports control units such as Engine, Transmission, ABS, Airbag, Engine Cooling Module, Instrument Cluster, Climate Control, BCM and more.
  • the diagnostic interface works as a multiplexer, selecting the appropriate pin for communication. PIN 3, PIN 7, PIN 8, PIN 12 = Serial Link (ISO9141, KW81, KW82, KWP2000)
  • Fault codes will be shown with all information that's available
  • Supported Language: English
  • Compatible with Windows XP 7 8 10 (32/64 bit)
  • Genuine FTDI FT232RL USB Serial Converter
  • Genuine Microchip PIC18F458 Micro-controller

Full Fault Code Text Description:

  • Full Status Information (Present, Not Present, Intermittent)
  • You can copy, save or print out the fault codes. From the fault codes window, you can go directly to the measuring blocks window
  • The software shows you the measuring block information on many control modules (select from the list)
  • The software is capable of showing 8 measuring block parameters simultaneously. Note: The same rate depends on the communication protocol. For example, an older ECU can be very slow during communication, while the newer Multec or Bosch units are faster (using KWP-2000) and the newest CAN based control units are even faster.

You can also run output tests on many controllers:

  • PIN 6-PIN 14
  • PIN 3-PIN 11
  • PIN1
  • HSCAN- Dual-wire, High Speed CAN BUS, 500 kbps
  • MSCAN- Dual-wire, Medium Speed CAN BUS 95 kbps
  • SWCAN- Dual-wire, Low Speed CAN BUS, 33.3 kpbs

What’s Included:

  • OPCOM V1.7 Diagnostic Interface 
  • USB Cable
  • Driver and Software

Supported Light Commercial Vans: 

  • 2001-2014 Renault Trafic (Select Vivaro as the vehicle type)
  • 2001-2014 Opel/Vauxhall Vivaro
  • 2001-2004 Nissan Primastar (Select Vivaro as the vehicle type)
  • 2005-2014 Nissan NV300 (Select Vivaro as the vehicle type)



Installation Notes:

  • For Windows 7, dotnetfx35_SP1 must be installed
  • Software must be run as Administrator (Right click software icon, run as administrator)

What other features can this device do?

  • You will get information on the state of the activated output, which helps to identify the failed components. With OPCOM, you can learn immobilizer keys and remote keys for the central door locking
  • You can reset and program the following immobilizer related items: ECM, BCM, IPC. You will need the vehicle security code found on the CAR-PASS
  • The interface is USB based, so there are no compatibility issues. The USB interface is fast enough to handle the high-speed CAN BUS systems, which is currently 500 KBPS. This is the main reason why only USB based interfaces are available for CAN BUS