VAG K+CAN Commander 1.4 OBD2 Diagnostic Cable

$24.99
(2 reviews) Write a Review
SKU:
VAG-1.4
If Currently Back-Ordered:
Please contact us to special order this item

This product can be used to correct your odometer, read Security Access Codes, program keys, airbag reset, TV Activation and diagnostic for Volkswagen vehicles such as the Passat, Bora, Polo and Golf; Audi vehicles such as the A4, A6 and A8; Skoda vehicles such as the Superb, Octavia and Fabia.


NOTE: The VAG K+ CAN Commander 1.4 is a powerful tool that can read/write electronic components. Improper usage can disable components. It’s highly recommended to backup and save all electronic modules prior to performing any modifications

Features

  • Diagnostic via CAN and Special functions via K-line.
  • Covers all electronic control units in vehicles (diagnostic addresses from 0x01 to 0x80). This can allow of user to investigate and diagnosis some new units untouchable for remaining diagnostic tools. Functions are under CAN-TP2.0.
  • Manual definition of running diagnostic session not like other diagnostic tools with standard diagnostic session 0x89. Function is under CAN-TP2.0.
  • Broadcast diagnostic request disable normal communication, clear DTCs, Logistic (transport) mode. Functions are under CAN-TP2.0.
  • Allows managing of brand new units (and immobilizer units) where it allows programming of PIN, SKC, BGW, MAC. Functions are under CAN-TP2.0.
  • Most of popular diagnostic requests identifications, coding, adaptations, DTCs and s.o. Functions are under CAN-TP2.0.


Special Functions

  • Odometer correction in instrument clusters and EDC15x.
  • Read Security Access Code/Login WFS.
  • Read/program immobilizer data.
  • Read/write EEPROM from instrument cluster/immobilizer. All supported clusters CAN/K.
  • VAG MMI TV Activation.
  • Read/Write EEPROM of Engine Control Units BOSCH VAG-EDC15x, VAG-ME7.1.1, VAG-Cartronic ME7.8,Porsche.
  • Key learning buttons for easy usage (not needed security code). Can do component security authorization.
  • Key learning Porsche CAYENNE (not needed security code) K+CAN.
  • Custom memory reading from different units like ECUs, EZS-Kessy and s.o..
  • Reading flash memories EDC16x, EDC15x, ME7x, MED951, MED751 (with next update will be possible programming of flash memories
  • Crash data clear in airbag units.


List of vehicles covered for odometer change function:

  • Audi Q7 (CAN)
  • Audi A2 (K)
  • Audi A3 (CAN) up to 2007
  • Audi A3 VDO/M73 up to 2003 (K)
  • Audi A4 VDO/M73 (K)
  • Audi A4 BOSCH - RB4 clusters (CRYPTO eeproms R/W by OBDII)
  • Audi A6 VDO (K)
  • Audi A6 (CAN)
  • Audi Allroud (K) up to 2004
  • Audi A8 (K) VDO93xx
  • Audi A8 (CAN) up to 2007 !!!
  • Audi TT (K)
  • Seat Alhambra (K)
  • Seat Altea (CAN) 
  • Seat Arosa (K)
  • Seat Cordoba after 1999 (K)
  • Seat Ibiza VDO after 1999 (K)
  • Seat Leon (K+CAN)
  • Seat Toledo (K+CAN)
  • Skoda Octavia (K)
  • Skoda Octavia II (CAN)
  • Skoda Superb (K)
  • Skoda Roomster (K)
  • Skoda Scout (CAN)
  • Skoda Fabia (K)
  • VW Bora (K)
  • VW Beetle (K)
  • VW Caddy (CAN)
  • VW EOS (CAN)
  • VW Golf4 VDO/Motometer/BOSCH RB
  • VW Golf5 VDO (CAN)
  • VW Golf5 VISETEON
  • VW Crossgolf (CAN)
  • VW Individual (CAN)
  • VW Jetta (K+CAN)
  • VW Passat B5/B6 (K+CAN)
  • VW Polo VDO/Motometer (K)
  • VW Sharan (K)
  • VW T4/T5 VDO (K)
  • VW Touaran VDO (CAN)


List of vehicles covered for security access code/login reading via OBDII function:

  • Audi A2
  • Audi A3 (CAN) up to 2007 !!!
  • Audi A3 VDO/M73 up to 2003 (K)
  • Audi A4 VDO (K)
  • Audi A4 BOSCH (K) up to 2001
  • Audi A4 after 2000 - petrol engines >= 1.8
  • Audi A6 VDO (K)
  • Audi A6 (CAN) petrol engines
  • Audi Allroad (K) up to 2004
  • Audi Allroad (CAN) petrol engines
  • Audi A8 up to 2001
  • Audi A8 from 2001 to 2002 2.5TDI
  • Audi A8 (CAN) 2003+ petrol
  • Audi TT (K)
  • Audi Q7 petrol engines
  • Seat Altea (CAN)
  • Seat Cordoba after 1999 (K)
  • Seat Ibiza (VDO) after 1999 (K)
  • Seat Leon (K+CAN)
  • Seat Toledo (K+CAN)
  • Skoda Octavia
  • Skoda Octavia II (CAN)
  • Skoda Superb
  • Skoda Roomster
  • Skoda Scout (CAN)
  • Skoda Fabia
  • VW Bora
  • VW Beetle
  • VW Caddy (CAN)
  • VW EOS (CAN)
  • VW Golf4 VDO/Motometer/BOSCH RB
  • VW Golf5 VDO (CAN)
  • VW Crossgolf (CAN)
  • VW Individual (CAN)
  • VW Jetta (K+CAN)
  • VW Passat B5 (K) B6(CAN)
  • VW Polo5
  • VW Sharan after year 2000
  • VW T5
  • VW Phaeton petrol
  • VW Touareg petrol
  • VW Touaran VDO (CAN)
  • PORSCHE Cayenne (CAN/K)


*Current version 1.4 covers VW/SEAT/SKODA (CAN) up to September 2006 while AUDI covered up to 2007

Important Notes: You need to install the USB driver and the software in the CD before you test or use the cable.
When you have the cable connected to your computer for the first time, with the included CD in your computer’s CD driver, the USB driver can be installed automatically. It will NOT work with 64-bit Windows Operating Systems

Indicator Light: When you have the cable connected to your car and the car’s ignition is ON,  the indicator light will on.
It means the cable is ready to read data from your car. When you have the cable connected to your car and computer,
and the USB driver is installed, the cable will read data from your car, and the indicator light will flash.

2 Reviews

  • 4
    VAG K+Can Commander 1.4

    Posted by Unknown on 11th Jun 2018

    This OBD2 Cable has many features but requires some experience and learning to navigate the software to perform the functions you want to do. Great for users that know what they are doing but not good for beginners because there is not alot of support for this cable and software.

  • 3
    Works with cluster, not with ECU

    Posted by Jason on 18th Dec 2017

    I ordered the VAG K+CAN 1.4 to read both my Cluster and ECU. Unfortunately, it doesn't connect or read my ECU. I've asked OBD for assistance, a couple of times, but have received no response.